VISION (500 ml)
VISION
A unique compound that is Self-Diminishing able to achieve its highest
cut with much gloss and silky feeling on the surface.
There is some limitations to create a compound that is Universal and
adaptable to all Clear Coats. In some clear coat VISION creates swirls.
In some it is perfect no possible scratches at all.
For a certain clear coat the pad has to be primed and in some certain
clear coat , only 2-3 pea size drops of compounds is needed.
In view of the sharpness of the granules, VISION has to be understood
by much testing. Following are the recommended methods as we had
done the testing and understand how to use such a unique compound.
FURY WOOL
FURY WOOL is a far better cutting media than Foam pad. if the surface is extremely
hard and requires heavy correction, you need to prime the pad and spread
to a wider area as much as possible as the compound has a low viscosity,
so it spreads well. Polish and allow the compound to work on surface longer.
During polishing when the compounds looks like water, it goes to show it
is fading. Here you can stop and wipe away.
To start polishing in a slow speed then gradually higher and end with a slow
speed. For RO is 1000/1200max and for DA is 2000/4000max.
FURY OG (Orange)
A medium hard pad would require 3-4 pea size to achieve One Step.
In view it is medium-Hard pad, the granules tends to break slower. So, it
warrants lesser compound but yet achieving the results in High glossy cut.
Speed for RO is 1000/1200max and for DA is 2000/4000max.
To start polishing in a slow speed then gradually higher and end with a slow
speed. For RO is 1000/1200max and for DA is 2000/4000max.
Apricot & Yellow
These two are Closed cell pads (Non-Reticulated) .
Apply only 3-4 pea size which is sufficient for a good size panel.
Compound would finish fast in view it is closed cell.
Always allow compound to work on surface until fades.
To start polishing in a slow speed then maintain at low speed as the pads
are close cell. For RO is 1000max and for DA is 2000max